Anchoring & Patching:

  Concrete Renew
  Concrete Renew Fine
  Planicrete UA
  Planitop 18
  Planitop X
  Rockite Cement
  Tilt Finish

Concrete Repair:

  PolyQuik® Products

For current pricing and availability,
please contact our

Sales Counter
(907) 459-4800

or by   E-Mail

Anchoring & Patching

    All-CreteTM 20

All-CreteTM 20 is a single-component, cement-based, polymer-modified patching and repair product for any maintenance and new construction projects. All-CreteTM 20 can be applied from featheredge to 1 inch per lift. It can be used inside or outside for horizontal, vertical and overhead surfaces. Sets in 20 minutes.

Prod.# Description Packaging Coverage
BA 100 5500All-CreteTM 2050 lbs bagapprox. 0.54 cu ft

    Concrete RenewTM &
    Concrete RenewTM Fine

Concrete Renew TM and Concrete RenewTM Fine are one-component, polymer-modified cementitious materials for the resurfacing of existing concrete. Both feature a natural light gray color that provides a uniform, like-new look to concrete surfaces.

Concrete Renew TM is suitable for broom finishes and decorative trowel finishes on sidewalks, driveways, steps and anywhere that has exposed concrete.

Concrete RenewTM Fine allows a variety of finishing options, including broom finishes and decorative trowel finishes, on sidewalks, driveways, steps and anywhere that has exposed concrete

Prod.# Description Packaging Coverage
MP 1112 6000Concrete RenewTM25 lbs bag50 - 75 sq ft
MP 1112 5000Concrete RenewTM Fine25 lbs bag 50 - 75 sq ft

    Planicrete® UA

Planicrete® UA is a next-generation, water-based, one-component, concentrated liquid latex admixture used to enhance the performance of several MAPEI products, including mortar mixes.

Using Planicrete® UA as part of the designated design mixes will increase product performance in the areas of bond, flexural and tensile strengths in addition to increased durability and enhanced workability.

Prod.# Description Packaging Coverage
MP 36253Planicrete® UA1 gal 

    Planitop® 18

Planitop® 18 is a one-component, shrinkage-compensated, fast-setting, cementitious repair mortar with a corrosion inhibitor.

Planitop® 18 gains strength rapidly and is particularly suited for all interior/exterior horizontal concrete repairs, including bridge decks, parking-garage floors, and various horizontal DOT (Department of Transportation) concrete repairs from 1/2" to 2" (12 mm to 5 cm) thickness applied neat and up to 8" (20 cm) extended. Planitop® 18 features exceptional durability and very low chloride permeability rating.

Prod.# Description Packaging Coverage
MP 1795 0000Planitop® 1850 lbs bag0.41 cu ft

    Planitop® X

Planitop® X is a one-component, shrinkage-compensated, fast-setting, polymer-modified, high-build cementitious repair mortar. It is suited for all vertical, overhead and horizontal concrete applications, including precast/ prestressed, tilt-up, post-tensioned and cast-in-place concrete.

Planitop® X can be applied in thicknesses featheredged to 4" per lift. Planitop® X is engineered with MAPEI Easy Glide TechnologyTM for ease of application. It is light gray to match existing concrete surfaces.

Prod.# Description Packaging Coverage
MP 1285 0010Planitop® X10 lbs bag 
MP 1285 0000Planitop® X50 lbs bag


Mapecem® Quickpatch is a versatile, fast-setting, cementitious material used for the patching of interior/exterior concrete surfaces including concrete floors, driveways, sidewalks and concrete pads. Mapecem® Quickpatch features extraordinary ease of placement, with a variable water ratio and outstanding workability.

Light gray Mapecem® Quickpatch can be applied from featheredge to 3” (7,5 cm) for ramping or filling. That makes it ideal for restoring weathered, damaged concrete surfaces to a uniform, superior wearing and better-than-new appearance. When used for horizontal substrate repair before application of self-leveling underlayments, Mapecem® Quickpatch sets fast for easy and cost-efficient repairs, minimizing job-site turnaround time.

Prod.# Description Packaging Coverage
MP 1051 000Mapecem® Quickpatch10 lbs bagsee Product Info
MP 1055 0000Mapecem® Quickpatch50 lbs bag

    Rockite Cement Compound

Rockite Cement is a fast setting, hydraulic-type cmeent compound of ore than twice the strength of fully cured conventional concrete. When mixed with water to a pourable consistency, it flows and seeps into place with an initial set within 15 minutes.

Rockite can be used to anchor bolts, railings, posts, pulleys, etc. It can also be used to patch breaks and holes in concrete, terrazzo, tile, brick and stone.

Prod.# Description Packaging Coverage
HL 10001Rockite1 lb box1 lb yields approx. 18-3/4 cu in.

92 lbs yield 1 cu ft.
HL 10005Rockite5 lbs box
HL 10010Rockite10 lbs tub
HL 10025Rockite25 lbs box
HL 10050Rockite50 lbs box

    Tilt FinishTM

Tilt FinishTM is a versatile, fast-setting, polymer-modified material utilizing a proprietary blend of cements and extremely fine aggregate. Tilt FinishTM is ideal for producing a smooth finish on concrete surfaces including tilt wall, poured-in-place concrete, masonry, pre-cast beams and columns.

Tilt FinishTM features extraordinary ease of placement, with a variable water ratio and outstanding workability. Light gray Tilt FinishTM can be applied from featheredge, up to 1/2" (12 mm) in confined areas. Ease of placement makes it ideal for covering imperfections in concrete surfaces, providing a uniform and light gray appearance, or a smooth surface before painting or application of coating.

Prod.# Description Packaging Coverage
MP 14720 Tilt FinishTM20 lbs bagsee Product Info


Waterplug® is a cement-based, quick-set, hydraulic compound that instantly stops running water or seepage through concrete or masonry walls and floors. It actually becomes harder and more resistant when subjected to constant water pressure.

Packaged in dry form, Waterplug® requires only the addition of clean water to make it ready for use. Waterplug® contains no metallics and will not shrink or oxidize. It seals out water for the life of the structure, and can be used for stopping running water through cracks and holes in concrete or masonry walls.

Prod.# Description Packaging Coverage
BA 100 6485Waterplug®2-1/2 lbs can1 lb will fill 17 cu in
or a crack
3/4" x 3/4" x 30"
BA 100 6484Waterplug®10 lbs can
BA 100 6479Waterplug®50 lbs pail

Concrete Repair

    Product Line

Concrete Repair Products
POLYQuik Fastpatch concrete repair products are fast curing, tough materials. Each product is designed with ready-to-use packaging to meet needs your application.

For more information regarding specific product applications, please contact the
Sales Counter at (907) 459-4800 or by e-mail


©2017 MDU Resources Group, Inc.