Casting Plaster

Plastering Accessories:

 Metal Lath
 Stucco Fibre

 Building Paper
 Veneer Plaster Trim
 Expansion Joint

 Short Flange Casing Bead
 Expanded Flange Casing Bead

 Wind-Devil 2™ Plates

For current pricing and availability,
please contact our

Sales Counter
(907) 459-4800

or by   E-Mail

    Industrial Plasters

#1 Casting Plaster from Glacier Northwest is similar to white art plaster except mixed at a lower-use consistency to increase strength, chip resistance, and to further minimixe paint absorption.

Technical Properties Casting Plaster Casting Plaster
Metric Conversion
Use Consistency
[Parts of water by weight per 100 parts plaster]
65 65
1 Hour Compressive Strength 1,200 psi 8.27 MN/m2
Dry Compressive Strength 2,400 psi 16.55 MN/m2
Total Absorption Capacity    
Density - Wet 100.0 lbs/ ft3 1.60 g/cm3
Density - Dry 72.5 lbs/ ft3 1.16 g/cm3
Set Time* 27 - 37 min 27 - 37 min
* Other set times may also be available. Call our sales representative for more information.
Hand mix times will be longer.

Prod.# DescriptionPackagingCoverage
GN 4002#1 Casting Plaster100 lbs bag  

    Ultracal® 30 Gypsum Cement

Ultracal® 30 is a super strength gypsum cement recommended where extreme accuracy and greater surface hardness are required, as in duplicator models. Harder and stronger than Hydrocal B-11, Ultracal 30 has the lowest expansion of any rapid setting gypsum cement available. It has a gradual set and long period of plasticity. Ideal for splash casting molds and models for phenolic, polyester and epoxy resins. It was designed to give the pattern making industry the ultimate in a gypsum cement tooling medium.

Prod.# DescriptionPackagingCoverage
GN 4100Ultracal® 30100 lbs bag  

Plastering Accessories


PermaLath® is an open-wave, three-dimensional, nominal 1/8" thick glass fiber reinforcing lath. Patent pending.

A component of a 3/8"–1/2" thick exterior Portland cement plaster stucco application that provides keying and continuous reinforcement for stucco used on vertical wall applications with solid backing. Not for use on soffits or open framing.


  • Non metallic
  • Pliable, with no sharp edges
  • Non-directional
  • Wide rolls
  • Three-dimensional profile
  • Alkali resistant
  • Packaged in lightweight rolls.
  • Benefits:

  • Will not rust
  • Easier and safer to handle and cut
  • Can be applied vertically or horizontally
  • Fewer overlaps required to give better coverage
  • Self furring, excellent mechanical key using
      traditional fastening procedures
  • Long-term durability and performance
  • Application time/labor savings.
  • Prod.# DescriptionPackagingCoverage
    BA 102 7206PermaLath® 16 lbs roll39" x 150 linear feet

        Wind-Devil 2™ Plate

    The original and industry-leading, two-inch-diameter fastener, the Wind-Devil 2 system is by far the most popular and technologically advanced EIFS mechanical fastening system on the market.

    The patented “bullseye” closure arms create a thermal chamber to protect the EIFS lamina and allow easy, effi cient backing out of any screw, whenever necessary, saving valuable time and money.

    Prod.# DescriptionSize Packaging
    WLWD2 PLATEWind-Devil 2™ Plate  1,000 / box

    Wood & Lite Metal Assembled Fasteners (WLMT)

    Prod.# DescriptionInsulation Thickness Screw Length Packaging Weight
    WL WLMT1WMLT-11" only1-5/8" 1,000/ box 15 lbs
    WL WLMT2WMLT-21-1/2"2" 1,000/ box 18 lbs
    WL WLMT3WMLT-32"2-1/2" 1,000/ box 19 lbs
    WL WLMT4WMLT-42-1/2"3" 1,000/ box 20 lbs

    ©2017 MDU Resources Group, Inc.